XJ-300ST More Info

2.1 Speaker Setup

Adding to this flexibility comes the new patented EQ Interlock design - two amplifiers can be clicked together resulting in a 4 channel amplifier using only 1 rack U of space. The XJ-300ST can also be mounted on the wall or inside the cabinet by fastening the short mounting ears to the pre-assigned holes on the side of the amplifier.

With endless configuration scenarios, the XJ-300ST amplifiers can be used as mono (bridged) amplifiers, 2.1 channel amplifiers, 2-channel amplifiers, 4/8/12 and 16 channel amplification with industry leading power density and efficiency.

All the installer or avid user needs to begin any size installation is a given number of XJ-300ST amplifiers. No need to buy a cumbersome mix of different amplifiers to achieve a certain number of channels or power level. Besides the simplicity this is an inventory dream for any installer.

Need a subwoofer amp? Grab 1 x XJ-300ST.

Need a 4 channel amp? Grab 2 x XJ-300ST.

Need to wire a complete 7.1 system with very large front speakers? Grab 5 x XJ-300ST.

Bridge one for each LCR and use the remaining two for the 4 rear channels. All this using only 3U of rack space!

Approaching 99 percent efficiency, the XJ amp never gets hot and can be placed in a tight rack with components on all sides. At only 1U rack high and half a rack in width, this is an amazing achievement.

The XJ-300ST produces continuous rock solid power - 110 Watts RMS at 8 ohms pr channel and 320 Watts RMS bridged into 8 ohm.

This massive power capability is possible due to the advanced nature of the patented Class J output stage. The switching frequency of the output and the amplitude of the power supply is modulated in real time based on the frequency and amplitude content of the input. No other amp can match the efficiency and power of Class J.